Most of the Sengled bulbs are Element bulbs—which require a hub in order to be used. The Sengled WiFi bulb does not require a hub.
First, make sure you have a Sengled WiFi bulb as depicted below.
The Sengled WiFi bulb is on the left. The Sengled Element Classic bulb is on the right.
Before getting started, make sure your phone is connected to your home’s 2.4 GHz WiFi—i.e. the Wi-Fi to which your wish to setup the Sengled Wi-Fi bulb.
Additionally, since you are setting the Wi-Fi bulb up with an Android phone, please do the two steps from this article before trying to setup the Smart Wi-Fi bulb.
If you do have a Sengled Wi-Fi bulb, open the Sengled Home app to add the Sengled Wi-Fi bulb.
From here, press the three dots in the circle in the top right corner. Then, press “Add Device”.
Tap on “Smart Wi-Fi Bulbs”.
Now, power the Smart Wi-Fi bulb on.
Remember Sengled Smart Wi-Fi LED bulbs, like most LED bulbs, cannot be used on dimmer switches such as wall dimmers, ceiling fan fixtures or 3-way lamps.
Furthermore, Sengled Smart Wi-Fi LED bulbs, like almost all LED bulbs, cannot be used in fully-enclosed fixtures.
Due to humidity concerns, the Smart Wi-Fi LED bulbs cannot be used outdoors or in condensing environments such as restrooms.
After the bulb is powered on, wait for it to blink twice. After it blinks twice, press “Next”.
The Sengled Home app will search for the Wi-Fi bulb.
Your mobile phone will try to connect to the Wi-Fi bulb.
Once connected, you will be on the “Enter the password for…” page.
The Wi-Fi to which the Sengled Smart Wi-Fi LED bulb will connect to is determined by the Wi-Fi to which your device was connected to before setup.
Type in the password for the Wi-Fi displayed in the Wi-Fi name box. Use the “Show” button to ensure the password is correct. An incorrect password will cause setup to fail.
Once you have ensured the password is correct, press “Next”.
Your Wi-Fi bulb will proceed to connect to your router’s Wi-Fi.
Once the bulb is added, you will be on a page that says “Congratulations”. Feel free to move the bulb to the desired location of use; keep in mind that the range of the bulb from the router is based in 2.4 GHz WiFi so it can only be used in an area where your 2.4 GHz WiFi signal reaches.
From the “Congratulations” page, we can assign the bulb to a room in the Sengled Home app. In this example, the bulb is physically in the dining room, so we will assign the bulb to the “Dining Room” in the Sengled Home app. To do this, since that room has not been created yet, press the “Add Room” button.
In the “Add a New Room” pop-up, we tapped on “Dining Room”; then, we tapped on “Ok”.
After that, the bulb will be renamed based upon the room it is in. The automatically generated names make it much easier to identify and organize the bulbs if you wish to connect them to your Echo/Alexa or Google Assistant.
If the location and name of the bulb is to your liking, press “Done”.