Note: A Sengled Smart hub is required to use the Sengled Smart Plug.
First, open the Sengled Home app and press the three dots in a circle icon in the top right corner. Then, press “Add Device”. Do not power the smart plug on just yet.
From here, press “Smart Plug”. Select the hub to which you wish to add the plug. If you only have one hub, press “Next”.
In the provided example, we only have one hub, so we pressed “Next”.
This will take us to the “Locate the QR Code” page. From here, press “Scan Code” to get to the QR code scanning screen.
Scan the QR code of the Smart Plug which is located on the side of the plug. The provided picture is a fine example of how to scan the QR code—it was taken a split second before the code scanned.
After the code has been scanned, you will be on a page that says, “Make sure the smart plug is powered on.” After the smart plug has been plugged in and powered on, it will flash slowly. Once you notice it is flashing slowly, press “Yes”.
Now, the Sengled hub will search for the Smart Plug.
After the hub is found, we will be on a page where we can turn the power of the hub on/off. The blue power indicator light will turn off when the smart plug is powered off—along with whatever is plugged into the face of the hub.
In the provided example, we assigned the plug to the Family Room.
After assigning the bulb to the desired room, press “Done”.