How do I integrate Element with Samsung SmartThings?

Using Element Bulbs With SmartThings Hub                                

In the SmartThings mobile app:

  1. Tap My Home
  2. Under Things, tap Add a Thingat the bottom of your Things list
  3. The app will say Looking for devices…
  4. While the Hub searches, turn the bulb ON
  5. When the device is discovered, it will be listed at the top of the screen
  6. Tap the device to rename it and tap Done
  7. When finished, tap Save
  8. Tap Okto confirm


How to reset the Sengled Element Bulb

 To re-initiate pairing mode, reset the bulb.

Video to Reset of ELEMENT BULB

To physically reset the device:

  1. Beginning with the bulb ON, quickly turn the bulb OFF and ON 10 times in quick succession (using a light switch or power strip works best)
  2. The bulb will blink 5 times when it has successfully reset


Or, if the bulb is connected with SmartThings but is not performing as expected, remove the device via the SmartThings app, reset the device, and then reconnect it with the SmartThings Hub.

To remove the device via the SmartThings app:

  1. Tap My Home
  2. Tap Things
  3. Tap the device you wish to remove
  4. Tap the gear icon 
  5. Tap Remove
  6. Confirm removal (this cannot be undone)


Was this article helpful?
>Yes, it was!
>Not really
Great! Thanks for your feedback :)

Can't Find What You're Looking For?

Send us a message