Menu

Using Element With Google Home

Step 1: Download and install the Sengled Element app, follow in-app instructions or instructions at https://support.sengled.com/hc/en-us/categories/202736787-Element to add hubs and bulbs to the Element app. Make sure you can control the bulbs from this app first.

Step 2: Power on Google Device.

Step 3: Download and install the Google Home mobile app.

Step 4: Connect your mobile device to the same Wi-Fi network as your Google Home device.

Step 5: Open the Google Home app. The App should detect your Google Home device. Follow the app's instruction or visit: https://support.google.com/googlehome/answer/7029485?hl=en to add Google Home device.

Step 6: From the top left corner of the home screen, tap 'Menu' and navigate to 'Home Control' tab. Tap the plus sign in the lower right corner and select 'Sengled Home' from the list of partners.

Step 7: Input your Sengled app account credentials when prompted.

Please note that "Google Home" app will not automatically assign the bulbs to their corresponding scenes that are already assigned by the 'Sengled Element home' app.

You may, however, assign them to rooms through the Google Home app to keep the same groupings (i.e: if you have two Element bulbs grouped in one 'Office' scene in the Sengled Element home app), you may assign them to an 'Office' room in the Google Home app in order to use grouping functionality.

Please note that name changes made in the Google Home app will not reflect in the Sengled Element app. Additionally, name changes made through the Sengled Element app will not be reflected in the Google Home app unless you un-link and then re-link your Sengled Home.

At this time, Element Plus’s CCT tuning functionality is not supported through Google Home.

To do this: 

Say "Ok Google" or “Hey Google," then...

To turn on/off a light

"Turn on <light name>"

Dim a light

"Dim the <light name>"

Brighten a light

"Brighten the <light name>"

Set a light brightness to a certain percentage

"Set <light name> to 50%"

Dim/Brighten lights by a certain percentage

Dim/Brighten <light name> by 50%"

Turn on/off all lights in room

“Turn on/off lights in <room name>"

Turn on/off all lights

“Turn on/off all of the lights"

Was this article helpful?
>Yes, it was!
>Not really
Great! Thanks for your feedback :)

Can't Find What You're Looking For?

Send us a message